Strižný mlyn SM 100

Technické informácie (1)

Technické správy (18)

  • Toxic substances in our daily life

    Plastic is an inherent part of our everyday lives; it is used in a huge variety of things such as, for example, packaging, furniture, clothing or electronic devices. Though the utility of the material is undoubted, consumers are increasingly unsettled by recurring news about hazardous substances detected in plastics.
    Substances such as plasticizers, which are not firmly bound in the material, are absorbed via the skin and can influence the hormonal balance. Plasticizers contained in food packaging, for example, penetrate into the food and thus into the human body when the food is eaten. Plasticizers in toys are a particularly serious problem; children tend to take toys into their mouths thus absorbing the dangerous chemicals.  Equally hazardous are polycyclic aromatic hydrocarbons (PAH). The family of PAH comprises more than 100 compounds most of which have been found to be carcinogenic.
  • Outdoor clothing: Pure nature or traces of poison?

    Outdoor activities such as hiking, biking or climbing are very popular. As a result, the textile industry offers a huge variety of functional outdoor clothing made from synthetic high-tech materials which are wind- and waterproof as well as breathable. In 2013 Greenpeace published a study proving that hazardous substances such as perfluorinated and polyfluorinated chemicals (PFC) were used in weatherproof clothing as protection against water or dirt. This article describes the sample preparation process with cutting mills and cryogenic mills of high-tech fibres.
  • The effect of grinding tools on metal contamination

    Reliable and accurate analysis results can only be guaranteed by reproducible sample preparation. This consists of transforming a laboratory sample into a representative part sample with homogeneous analytical fineness. Retsch offers a comprehensive range of the most modern mills and crushers for coarse, fine and ultra-fine size reduction of almost any material. The product range also comprises a wide choice of grinding tools and accessories which helps to ensure contamination-free preparation of a great variety of sample materials.
    The selection of the correct grinding tool depends on the sample material and the subsequent method of analysis. Different grinding tools have different characteristics, such as required energy input, hardness or wear-resistance.
  • Renewable energies on the rise

    Sample preparation of vegetable-based raw materials with laboratory mills

    Thanks to the increasing usage of biomass as a source of energy, the analysis of these materials in the context of R&D and quality control gains importance, too. Due to the complex properties of plant materials, adequate sample preparation can be rather a challenge.
  • Down to the bone

    Use of laboratory grinders for size reduction of human bones and bioceramics

    Bone implants and substances for bone regeneration are used in surgery to replace degenerated bone material by implants or to “re-build” it with specific substances. The material used in implants varies from autogeneic (supplied by the patient) through allogeneic (supplied by a donor) bones to replacement materials such as hydroxylapatite (HA) and tricalcium phosphate (TCP). Bovine bones and corals are used in conjunction with synthetically produced foamed materials to form a basis for the regeneration of bone substance. Various RETSCH mills are suitable for the preliminary and fine grinding of human bones as well as bioceramic materials.
  • As fine as necessary

    A variety of methods can be used to analyze solid materials. What they all have in common is the necessity to use a representative, homogeneous analysis sample which needs to have a particular fineness, depending on the analytical method used. The size reduction and homogenization of solids is usually carried out with laboratory crushers and grinders.
  • Representative Analysis Results Require Adequate Sample Preparation

    A faultless and comparable analysis is closely linked to an accurate sample handling. Only a sample representative of the initial material can provide meaningful analysis results. Rotating dividers and rotary tube dividers are an important means to ensure the representativeness of a sample and thus the reproducibility of the analysis. Correct sample handling consequently minimizes the probability of a production stop due to incorrect analysis results. Thus correct sample handling is the key to effective quality control.
  • Quality control of cement

    Quality control is an important aspect of cement production. Sample preparation is an essential part of it, because only a representative and reproducible processing of the sample material ensures reliable and meaningful analysis results. RETSCH offers a range of instruments for dividing, crushing, grinding and sizing all materials which are involved in the production process of cement, including secondary fuels. To ensure the right choice of instrument for the right sample material, Retsch offers free-of-charge sample testing in application laboratories all over the world.
    Elemental analysers based on combustion technology are a useful addition to XRF analysis for the quality control of cement and related products, ensuring fast, precise and reliable determination of carbon and sulphur. With its offering of analyzers using resistance or induction furnaces or both, ELTRA covers a wide range of applications for C and S determination in organic and inorganic samples. The product range is ideally suited to the variety of analytical applications in a cement plant.
  • Scrap turned into raw materials: End-of-life vehicles re-used

    The EU directive 2000/53/EG stipulates that as of 2015 95 % of the weight of a car that has reached the end of its life span have to be recycled. The work of ARN is strongly focused on this objective. Together with partner companies they make sure that old cars are processed in an environmentally compliant way. The recycling chain begins with the companies that dismantle the car and remove raw materials and liquids. Waste management companies collect these materials and deliver them to the processing companies who reuse the materials in accordance with high production standards.
  • Secondary fuels – Energy for the cement industry

    Due to decreasing resources and increasing market prices for primary fuels like oil, gas or coal, it is paramount for the cement industry to search for alternative energy sources. With regard to the CO2 emissions trading, a switch to energy sources which have a neutral CO2 balance can be rather profitable. Usually, these are non-fossil fuels. Industries with high energy consumption have made increasing use of alternative fuels during the last years. Accordingly, the use of so called secondary fuels (also waste derived fuels/wdf or refuse derived fuels/rdf) has gained importance. These are mostly combustible fractions of domestic or industrial waste which cannot be recycled.
  • Powerful Cutting Mill

    The SM 300 excels especially in the tough jobs where other cutting mills fail. It has a freely selectable speed range from 700 to 3,000 rpm with high torque. The mill is convenient to operate and easy to clean. Reliable and extremely efficient sample preparation in the laboratory is now guaranteed with the SM 300.
  • Renewable energy

    Wood residues from forestry work and wood processing are usually processed to wood chips. These can be used in different ways, depending on the type of wood, bark and residual moisture, for example as raw material for chipboards or as substrate for the cultivation of mushrooms. The major part, however, is used for energy generation. The quality of the wood chips can vary significantly, depending on their origin and condition. Trade and industry are interested in the percentage of dry matter and in the calorific value of the chips as the price calculation depends on the water contents of the product. With the analysis result representing an important economic factor, the representative and reproducible sample preparation gains importance, too.
  • Preparation of Elastic Plastics for the Detection of PAH

    Polycyclic aromatic hydrocarbons, short PAH, are usually a by-product of combustion and can be found, for example, in cigarette smoke or oil-based products. Mineral oil containing PAH is often used in rubber products as plasticizer, especially in black-coloured products such as car tyres, rubber grips of tools or rubber shoe soles. It was discovered that some polycyclic aromatic hydrocarbons are carcinogenic, so that maximum permissible values have been determined for the concentration of PAH in consumer products.
  • Size reduction of elastic plastics with volatile components

    Neutral-to-analysis sample preparation for the detection of PAH and phthalates
  • Cutting Mill SM 300 - Refinement of a well-proven grinding principle

    Cutting mills are used in many different areas of sample preparation for subsequent analyses. Typical applications include the size reduction of secondary fuels, the processing of biomass for renewable energy research, the control of products in the context of RoHS and WEEE regulations or the recovery of precious metals – the variety of sample materials is huge.
  • Detection of Mycotoxins in Nuts

    Preliminary and fine size reduction
  • Size reduction within the context of sample preparation

    In general “size reduction” is taken to mean the disintegration of solid substances by mechanical forces without altering their state.
  • Sample Preparation of Solid Materials for the XRF-analysis

    X-Ray fluorescence is one of the most versatile methods to determine elements in a sample. The material is exposed to x-rays that cause each element to emit its own unique fluorescent x-ray. The subsequent analysis of the results is based on comparisons to standard samples with given chemical composition.

Výhrady k technickému riešeniu a nedostatkom