Strižný mlýn SM 400 XL

Produktový list PDF
Close

Jazyk:


Cutting mills are suitable for the grinding of soft, medium-hard, tough, elastic, fibrous, and heterogeneous mixes of products. The Cutting Mill SM 400 XL is ideally suited for pre-cutting of large sample pieces but, depending on the application,  may also achieve the required fineness in one step.

The high torque of the new 3 kW drive allows for an exceptionally effective preliminary size reduction of heterogeneous mixtures, such as waste or electronic components.

The cutting mill is used successfully for a great variety of materials. The sample is only moderately warmed up during the grinding process so that the mill is perfectly suitable for grinding temperature-sensitive materials.  Due to the large open surface of the 240 mm x 240 mm bottom sieve, it is possible to grind large sample quantities and to increase the throughput.

When operated with the optional cyclone-suction-combination, the SM 400 XL is also suitable for grinding light sample materials. In combination with the wide choice of bottom sieves, hoppers and collecting vessels, the mill can be easily adapted to varying application requirements.

Príklady aplikácií

plastové hračky, polyméry, drevo , fólie, káble, kosti, korenie, krmivo pre zver, kŕmne granule, koža, lepenka, lignit, materiálové zmesi, odpad, papier, plasty, potrava, živice, guma, rastlinné materiály, slama, textil, zostatkové palivá, farmaceutické produkty, hay, PET preformy, ... pokračujte do aplikačnej databáze

Výhody

  • powerful size reduction thanks to 3 kW drive
  • optimálne strižné účinky
  • accepts large feed sizes up to 170 mm x 220 mm
  • quick and easy cleaning due to fold-back hopper, smooth surfaces
  • defined final fineness due to bottom sieves with aperture sizes from 1 - 20 mm

Rysy

Aplikácia zmenšovanie veľkosti rezom
Oblasť použitia biológia, chémia / plasty, medicína / farmaceutika, potrava, poľnohospodárstvo, engineering / environment / recycling
Vstupný materiál mäkký, stredne tvrdý, húževnatý, elastický, vláknité
Princíp redukcie veľkosti zrna strih, rez
Vstupná veľkosť materiálu * < 170 x 220 mm
Konečná jemnosť 1 - 20 mm
Obsah mlecej komory ~7.45L
Rýchlosť pri 50 Hz (60 Hz) 280 min-1
Obvodová rýchlosť rotora 2.25 m/s
Priemer rotora 152 mm
Druhy rotorov parallel section rotor
Typy násypiek univerzálne, dlhodobo na sklade
Materiál mlecích nástrojov tvrdená oceľ, karbid volfrámu
Rozmery sít trapezoid holes 1.00 / 2.00 mm
round holes 4.00 / 6.00 / 8.00 / 10.00 / 20.00 mm
Zberný systém / objemy collecting receptacle 5 l
optional: cyclone-suction combination
Pohon Trojfázový motor
Sila pohonu 3 kW
Elektrické napájanie rôzne napätie
Pripojenie k elektrickej sieti 3-fázové
Brzda motora -
Kód ochrany IP 54
Š x V x H zatvorený 695 x 1399 x 719 mm
Váha netto ~ 180 kg
Normy CE

Vezmite prosím na vedomie:
* v závislosti na vstupnom materiále a nastavení zariadenia / nastavenie

Princíp funkcie

Size reduction in the Cutting Mill SM 400 XL takes place by cutting and shearing forces. The sample hits the rotor and is comminuted between the blades and the stationary cutting bars inserted in the housing.

Thanks to the wide range of accessories, the SM 400 XL can be easily adapted to different application requirements

Výhrady k technickému riešeniu a nedostatkom

Newsletter Registration

Exclusive information about events, applications and product innovations!

Sign Up